These PELCO  Membranes of Silicon Dioxide (SiO₂) offer superior flatness. Using advanced MEMS manufacturing technologies combined with novel stress-reducing techniques, we have been able to provide Silicon Dioxide Support Films with unsurpassed flatness and a membrane thickness of 40nm, 18nm and 8nm. It is truly the next generation Silicon Dioxide membranes. The flatness of our silicon dioxide membranes is at least 10x better than competitive products. The SiO2 membranes are completely amorphous.

The Silicon Dioxide (SiO2) Support Films are manufactured using the PELCO^? 200nm Silicon Nitride (Si3N4) Support Films with the 0.5 x 0.5mm window on a perfectly round 3mm Si frame as a platform. The silicon dioxide support films consist of pure and amorphous thermal SiO2 membrane. The 0.5 x 0.5mm membrane is patterned into 24 ea. apertures with a size varying between 50 x 50μm to 70 x 70μm and etched back to the thermally-deposited amporhous Silicon Dioxide leaving a structure-free SiO2 thin membrane of 40nm, 18nm or 8nm, suspended by a 200nm optically transparent (Si3N4) support mesh. The bar size between the SiO2 apertures is 25-35μm and the boundary width is 25-55μm. The design of the mesh and the ratio of mesh suspension and Silicon Dioxide Film has been optimized to enable flat Silicon Dioxide Support Films with a size of 50 x 50μm to 70 x 70μm. The result is a Silicon Dioxide membrane with a truly superior flatness, ideal for TEM imaging. In the unique design of this PELCO^? product, the compression in the SiO2 film is balanced by the stress in the Si3N4 grid structure. The mesh size of the Silicon Dioxide Support Films is comparable to the area size found on most 300 and 400 mesh TEM grids and is considered to be a practical size for many applications. There are 24 fields of SiO2 support films on each frame. The boundary of 200nm Si3N4 membrane leaves ample area for experiments on Si3N4.

产品信息：

产品规格和包装：

其他信息：

详情请发邮件至：mknano@126.com。