|
样品照片： 
HRTEM： 
EDX： 
Raman和PL 光谱 
Description: This product contains full area coverage ReS2 monolayers on c-cut sapphire substrates. Sample size measures 1cm in size and the entire sample surface contains monolayer thick ReS2 sheet. Synthesized full area coverage monolayer ReS2 is highly crystalline, some regions also display significant crystalline anisotropy. Growth method: Our company synthesizes these monolayers using chemical vapor deposition (CVD) using highest purity (6N) gases and precursors in semiconductor grade facilities to produce crystalline and large domain size samples (1-50um). This is unlike commonly used MOCVD process wherein defects are very very large and domain sizes are small (10nm-500nm). Sample Properties | Sample size | 1cm x 1cm square shaped | | Substrate type | Sapphire c-cut (0001) | | Coverage | Full monolayer coverage | | Electrical properties | 1.6 eV Anisotropic Semiconductor (Indirect Bandgap) | | Crystal structure | Distorted Tetragonal Phase (1T’) | | Unit cell parameters | a = 0.630, b = 0.638 nm, c = 0.643 nm α = 106.74°, β = 119.03°, γ = 89.97° | | Production method | Atmospheric Pressure Chemical Vapor Deposition (APCVD) | | Characterization methods | Raman, angle resolved Raman spectroscopy, photoluminescence, absorption spectroscopy TEM, EDS |
Specification.
- Identification. Full coverage 100% monolayer ReS2 uniformly covered across c-cut sapphire
- Physical dimensions. one centimeter in size. Larger sizes up to 2-inch wafer-scale available upon requests.
- Smoothness. Atomically smooth surface with roughness < 0.2 nm.
- Uniformity. Highly uniform surface morphology. ReS2 monolayers uniformly cover across the sample.
- Purity. 99.9995% purity as determined by nano-SIMS measurements
- Reliability. Repeatable Raman and photoluminescence response
- Crystallinity. High crystalline quality, Raman response, and photoluminescence emission comparable to single crystalline monolayer flakes.
- Substrate. c-cut Sapphire but our research and development team can transfer ReS2 monolayers onto variety of substrates including PET, quartz, and SiO2/Si without significant compromisation of material quality.
- Support. 2Dsemiconductors USA is an American owned, regulated, and operated company. Our customers are well-protected by international as well as strict American customer laws and regulations. We give full technical support and guarantee your satisfaction with our well-established customer
- Defect profile. ReS2 monolayers do not contain intentional dopants or defects. However, our technical staff can produce defected ReS2 using a-bombardment technique.
|
